Quick answer: most recent Suunto watches (Race, Vertical, Run, 9 Peak, Ocean, Nautic S, Core 2) take a 22 mmQuick Release strap. The Suunto 9, 9 Baro, 7, D5 and Spartan Sport take 24 mm, and the Suunto 3 takes 20 mm. The Suunto 5, Spartan Ultra, Spartan Trainer, first-generation Core, Traverse and Ambit have a proprietary Suunto attachment: they do not accept a standard Quick Release strap. This chart gives the exact attachment of each Suunto model. Clipz-it straps: compatible or refunded.
The same series can change attachment from one generation to the next: find your exact model in the charts below. A watch with a proprietary Suunto attachment is changed with a tool (screw or pin) and does not accept a standard Quick Release strap; for these, write to us before ordering.
Proprietary Suunto attachment (screws or thin spring bar, tool required)
Proprietary
Not compatible with a standard Quick Release strap
How to identify your model and your attachment
The exact model name is on the case back and in the watch settings menu, under Information. A Suunto Quick Release attachment is recognized by the small spring pin that you pull on the side of the strap to release it, without tools. A proprietary attachment is recognized by its screws or its friction pin: the strap is then changed with a tool, in a workshop or at a service center, and does not accept a standard Quick Release strap.
To go further: the whole range is in the Suunto Straps collection and the short answers in the Suunto FAQ.