Garmin Descent Mk2 compatible straps

These 42 straps fit your Descent Mk2

Clip on tool-free · Free shipping over 34,99 € · 30-day returns · 2-year EU legal warranty

Attachment for your watch: QuickFit 26 mm (Garmin system)

Not sure which attachment you have?

Tell us your model and we’ll filter out anything that doesn’t fit.

Choose your Garmin watch

Select your model to see compatible straps

Sort by


Strap size and attachment: Garmin Descent Mk2

Quick answer: your Garmin Descent Mk2 uses the QuickFit 26 mm (Garmin system) connector. The straps on this page use the same connector and fit without tools.

WatchAttachment
Garmin Descent Mk2QuickFit 26 mm (Garmin system)

These straps also fit: Descent Mk1, Descent Mk2i, Descent Mk3i 51 mm, Descent X10, Descent X30, Enduro, Enduro 2, Fenix 6X Pro, Fenix 7X, Quatix 6X Solar, Tactix 7, Tactix Delta, D2 Mach 1 Pro. See all straps QuickFit 26 mm (Garmin system)

Compatibility chart for all Garmin watch models

Frequently asked questions

Which strap size should you choose for your Garmin Descent Mk2?

Your Garmin Descent Mk2 uses the QuickFit 26 mm (Garmin system) connector. Choose a strap with this connector system and this width: a different system, even one of a similar width, will not fit properly.

Which other watches accept the same straps?

Straps QuickFit 26 mm (Garmin system) also fit: Descent Mk1, Descent Mk2i, Descent Mk3i 51 mm, Descent X10, Descent X30, Enduro, Enduro 2, Fenix 6X Pro, Fenix 7X, Quatix 6X Solar, Tactix 7, Tactix Delta, D2 Mach 1 Pro.

How to change the strap on your Garmin Descent Mk2?

Lift the QuickFit lever located under the strap and slide the strap out of the watch. Place the new strap in the slot and press until it clicks. No tools are needed. Step-by-step guide to changing a watch strap

More about these straps

The Garmin Descent Mk2 uses QuickFit 26 mm straps. Every strap on this page has exactly this attachment: they swap in seconds, tool-free, thanks to the QuickFit latch.

The Garmin Descent Mk2 is a dive computer in the shape of a watch: a 52 x 52 x 17.8 mm case in fibre-reinforced polymer with a metal back, sapphire glass, a stainless steel or DLC titanium bezel depending on the version, and water resistance up to 100 metres. Its 1.4 inch MIP display (280 x 280 pixels) claims up to 16 days in smartwatch mode, 50 days in battery saver mode, 48 hours in GPS and 80 hours in dive mode, with 32 GB of memory. Garmin supplies it with a silicone strap (103.8 g) or a titanium one (160.3 g with that strap), and an extra-long silicone strap exists for wrists up to 355 mm. Because the watch lives in the water, this page puts silicone and titanium first, the materials of the original straps, then braided nylon, nylon, canvas and leather.

Clipz-it stands behind three points: compatible or refunded, free shipping over €34.99 and dispatch within 24-48 hours. Offer: buy 2 straps, get 1 free.

📖 Complete guide to choosing your strap

Frequently asked questions about Garmin Descent Mk2 straps

Do Descent Mk2i straps fit the Descent Mk2?

Yes. According to Garmin's official list, the Descent Mk1, Mk2 and Mk2i all use a QuickFit 26 mm. See the collections Descent Mk2i and Descent Mk1.

Does the Descent Mk2S have the same straps as the Mk2?

No. The smaller Descent Mk2S (43 mm) uses a QuickFit 20 mm, whereas the Mk2 uses a QuickFit 26 mm. See the page Descent Mk2S.

Does a Quick Release strap fit the Garmin Descent Mk2?

No. QuickFit and Quick Release are two different mechanisms: width alone is not enough to confirm compatibility. Choose the QuickFit 26 mm straps on this page. See our article QuickFit or Quick Release: which system for your Garmin.

How do I change the strap?

Release the QuickFit lock on the strap, remove it, then slide the new one in until it is firmly locked on both sides. No tools are needed. Our Garmin compatibility guide details every attachment.