Garmin Approach J1 compatible straps

These 16 straps fit your Approach J1

Clip on tool-free · Free shipping over 34,99 € · 30-day returns · 2-year EU legal warranty

Attachment for your watch: Quick Release 20 mm (standard spring bar)

Not sure which attachment you have?

Tell us your model and we’ll filter out anything that doesn’t fit.

Choose your Garmin watch

Select your model to see compatible straps

Sort by


Strap size and attachment: Garmin Approach J1

Quick answer: your Garmin Approach J1 uses the Quick Release 20 mm (standard spring bar) connector. The straps on this page use the same connector and fit without tools.

WatchAttachment
Garmin Approach J1Quick Release 20 mm (standard spring bar)

These straps also fit: Approach S12, Approach S40, Approach S42, Approach S44, Approach S50, D2 Air X10, Forerunner 55, Forerunner 165, Forerunner 245, Vivoactive 5, Venu Sq 2. See all straps Quick Release 20 mm (standard spring bar)

Compatibility chart for all Garmin watch models

Frequently asked questions

Which strap size should you choose for your Garmin Approach J1?

Your Garmin Approach J1 uses the Quick Release 20 mm (standard spring bar) connector. Choose a strap with this connector system and this width: a different system, even one of a similar width, will not fit properly.

Which other watches accept the same straps?

Straps Quick Release 20 mm (standard spring bar) also fit: Approach S12, Approach S40, Approach S42, Approach S44, Approach S50, D2 Air X10, Forerunner 55, Forerunner 165, Forerunner 245, Vivoactive 5, Venu Sq 2.

How to change the strap on your Garmin Approach J1?

Slide the small tab on the Quick Release connector to release the strap. Place the new one between the watch lugs, engage one side of the connector, then release the tab to secure the other side. No tools needed. Step-by-step guide to changing a watch strap

More about these straps

The Garmin Approach J1 uses a standard Quick Release spring bar of 20 mm. Every strap on this page has exactly this attachment: they swap in seconds, tool-free, by sliding the quick-release pin on the spring bar.

The Garmin Approach J1 is a golf GPS watch designed by Garmin for young golfers: a 390 x 390 pixel AMOLED display, a 43 x 43 x 11.4 mm case with an anodised aluminium bezel, chemically strengthened glass, 5 ATM, 29 g and 4 GB of memory. Its original strap is an elastic fabric one with hook-and-loop closure, for wrists from 115 to 195 mm. It claims up to 10 days in watch mode and 15 hours in GPS, and holds 43,000 courses. Its Garmin data sheet shows a standard 20 mm Quick Release: this page puts nylon, braided nylon and silicone first, as light as its original strap, ahead of canvas, leather and Milanese mesh.

Clipz-it stands behind three points: compatible or refunded, free shipping over €34.99 and dispatch within 24-48 hours. Offer: buy 2 straps, get 1 free.

📖 Complete guide to choosing your strap

Frequently asked questions about Garmin Approach J1 straps

Does the Approach J1 use the same straps as the Approach S12?

Yes. The Approach J1 and S12 are both on Garmin's official list of Quick Release 20 mm compatible devices. See the collection Approach S12.

Can the original elastic strap of the Approach J1 be replaced?

Yes. The Garmin data sheet shows a 20 mm Quick Release, the industry standard: it comes off by sliding the pin, tool-free, and is replaced by any Quick Release 20 mm strap on this page.

Does a QuickFit strap fit the Garmin Approach J1?

No. Quick Release and QuickFit are two different mechanisms: width alone is not enough. The Garmin Approach J1 uses a standard 20 mm spring bar, so choose the Quick Release 20 mm straps on this page. See our article QuickFit or Quick Release: which system for your Garmin.

How do you change the strap?

Slide the quick-release pin on the spring bar to release the old strap, then clip the new one in on each side. No tools are needed. Our Garmin compatibility guide details every attachment.

Straps compatible with Garmin Approach J1

Attachment: Quick Release 20 mm