Quick answer: most recent Suunto watches (Race, Vertical, Run, 9 Peak, Ocean, Nautic S, Core 2) take a Quick Release band of 22 mm. The Suunto 9, 9 Baro, 7, D5 and Spartan Sport take 24 mm, and the Suunto 3 takes 20 mm. The Suunto 5, Spartan Ultra, Spartan Trainer, Core first generation, Traverse and Ambit have a proprietary Suunto connector. They do not take a standard Quick Release band. This table gives the exact connector for each Suunto model. Clipz-it bands: compatible or refunded.
A series can change connector from one generation to the next. Find your exact model in the tables below. A watch with a proprietary Suunto connector is changed with a tool (screw or pin). It does not take a standard Quick Release band. For these models, write to us before you order.
Proprietary Suunto connector (screw or thin bar, tool required)
Proprietary
Not compatible with a standard Quick Release band
How to identify your model and connector
The exact model name is on the back of the case and in the watch settings menu, under Information. A Suunto Quick Release connector is the small spring pin (tab) you pull on the side of the band to release it, without tools. A proprietary connector is recognized by its screws or friction pin: the band is then changed with a tool, at a workshop or service center, and does not take a standard Quick Release band.
To go further: the full range is in the Suunto bands collection, and short answers are in the Suunto FAQ.