Bands compatible with Garmin Vivomove HR
Select your model to see only the bands that fit it.
Clips on tool-free · Free shipping on orders over $39.99 · 30-day returns
Your watch attachment: Quick Release 20 mm (standard spring bar)
Not sure about your connector?
Tell us your model. We'll rule out anything that doesn't fit it.
Band size and attachment: Garmin Vivomove HR
Quick answer: your Garmin Vivomove HR uses the Quick Release 20 mm (standard spring bar) connector. The bands on this page use this connector and swap without tools.
| Watch | Connector |
|---|---|
| Garmin Vivomove HR | Quick Release 20 mm (standard spring bar) |
These bands also fit: Vivomove Sport, Vivomove Luxe, Vivomove Trend, Venu, Venu Sq, Venu Sq 2, Venu 2 Plus, Vivoactive 3, Vivoactive 5, Forerunner 245, Forerunner 645, Approach S40. View all bands Quick Release 20 mm (standard spring bar)
Compatibility table for all Garmin watches
Frequently asked questions
Which band size should you choose for your Garmin Vivomove HR?
Your Garmin Vivomove HR uses the Quick Release 20 mm (standard spring bar) connector. Choose a band with this connector system and this width. A different system, even one with a close width, will not attach properly.
Which other watches take the same bands?
The bands Quick Release 20 mm (standard spring bar) also fit: Vivomove Sport, Vivomove Luxe, Vivomove Trend, Venu, Venu Sq, Venu Sq 2, Venu 2 Plus, Vivoactive 3, Vivoactive 5, Forerunner 245, Forerunner 645, Approach S40.
How do you change the band on your Garmin Vivomove HR?
Slide the small tab on the Quick Release connector to free the band. Place the new band between the watch lugs, engage one side of the connector, then release the tab to secure the other side. No tools needed. Step-by-step guide to changing your watch band
Learn more about these bands
The Garmin Vivomove HR uses a standard 20 mm Quick Release spring bar. Every band on this page has exactly this attachment: they swap in seconds, with no tools, by sliding the spring bar pin.
The Garmin Vivomove HR is a hybrid watch: analog hands on the front, a small 64 x 128 pixel touchscreen that appears under the dial, and a heart rate sensor on the wrist. Its 43 x 43 x 11.6 mm case comes in a Sport version (fiber-reinforced polymer, 40.8 g with its silicone band) and a Premium version (stainless steel case, leather band, 56.5 g). Selected Premium finishes come in 24-karat gold or 18-karat rose gold. It lasts up to 5 days in smartwatch mode, then up to 2 more weeks in watch mode. Because it is worn in the city as much as at the gym, this page lists leather, tweed and milanese mesh first, then stainless steel, nylon and silicone for training days.
Clipz-it commits to three points: Compatible or refunded, Free shipping on orders over $39.99 and Ships within 24 to 48 business hours. Offer: Buy 2 bands, get 1 free.
📖 Complete guide to choosing your band
Frequently asked questions about bands for the Garmin Vivomove HR
Does the Vivomove HR use the same bands as the original Vivomove?
Yes. Garmin's manuals for the Vivomove and the Vivomove HR both list a 20 mm width with a Quick Release pin on a spring bar. See also the Vivomove collection.
Which band should I choose for a stainless steel Vivomove HR Premium?
Leather, tweed or milanese mesh, listed first on this page, extend the dressier look of the stainless steel case. For sport, silicone, the original band of the Sport version, is still the most practical.
Does a QuickFit band fit the Garmin Vivomove HR?
No. Quick Release and QuickFit are two different mechanisms: width alone is not enough. The Garmin Vivomove HR uses a standard 20 mm spring bar, so choose the Quick Release 20 mm bands on this page. See our article QuickFit or Quick Release: which system for your Garmin.
How do you change the band?
Slide the pin on the bar to release the old band, then clip the new one into place on each side. No tools needed. Our Garmin compatibility guide details each attachment.
Straps compatible with Garmin Vivomove HR
Attachment: Quick Release 20 mm