How to change a watch band


How-to guide · Changing a watch band
How to change a watch band: complete guide 2026

To change a watch band, find its attachment system, release each half of the band, then attach the new band until it holds firmly. The method depends on the watch. The Apple Watch has release buttons, while other models may use a QuickFit button, a spring bar lever, or a removable attachment.

At a glance

  • Time: a few minutes, depending on the attachment system.
  • Tool needed: none for button or lever attachments. A suitable tool may be needed for a standard spring bar or screws.
  • Difficulty: easy for a fast-release attachment, intermediate for a removable attachment.
  • Summary: identify the attachment, remove both halves of the band, install the compatible replacement band, and check that it holds.

To choose a replacement, see the Apple Watch bands collection if your watch is an Apple Watch.

How to change a watch band: the quick method

The change starts with identifying the attachment on your smartwatch. Place the case on a soft cloth and check the attachment before applying any pressure.

Expert answer

To change the band on a smartwatch, place the case face down on a soft cloth, then locate the attachment on each side. On an Apple Watch, press and hold the release button and slide the band out. On a Garmin QuickFit attachment, press the band's button. On a lever spring bar, move the small tab inward. Then install a band whose attachment matches your watch exactly. Check that each side is engaged, then pull gently on it before wearing the watch.

Sources: Showroomprivé, "How to change a smartwatch band?"; Montre.com, "Changing the watch band."

Step-by-step instructions

For an Apple Watch, a Garmin, or a Samsung Galaxy Watch, the safe procedure is to identify the attachment, release the band without forcing it, install a compatible model, and check that it holds.

  1. 1

    Identify the attachment system

    Turn your watch over on a soft cloth and look at the junction between the band and the case. Look for a release button, a QuickFit button, a small lever on a spring bar, or a screw. The watch name alone does not tell you which method to use. Check the attachment on your watch and on the replacement band.

  2. 2

    Prepare the case and the new band

    Take the watch off your wrist and lay the case flat, screen protected by the cloth. Place the new band next to the old one to compare the two attachments. If your watch uses a spring bar between the case lugs, check the width of that gap in millimeters before fitting the replacement band.

  3. 3

    Release the first half of the band

    On an Apple Watch, press and hold the button on the back of the case, near the slot, then slide the band sideways. On a Garmin QuickFit band, press the attachment button to release it from its spring bar. On a lever spring bar, push the tab inward and gently pull the band away from the case.

    Tip: if nothing moves, look at the attachment again. Resistance usually means the mechanism is not fully released.
  4. 4

    Remove the second half

    Repeat the method for your watch's attachment on the other side of the case. Keep spring bars, screws, and small parts in a container if the new band will reuse them. Check that the attachment points are clean and that no part looks bent or damaged.

  5. 5

    Install the new band

    Align each attachment with its slot, then engage the band according to its system. Slide it onto the Apple Watch, lock it onto the QuickFit spring bar, or insert the ends of the lever spring bar into the holes in the case. Repeat on the second side. If the attachments do not line up naturally, stop and check compatibility again.

  6. 6

    Check the fit before wearing the watch

    Pull gently on each half of the band, in the direction it could come off. Check visually that the attachments are seated and that the spring bar, if there is one, rests on its two support points. If one side slides, lifts, or has play, remove it and repeat the attachment.

The best replacement band for your watch: our Clipz-it models that swap without tools

At Clipz-it, each band is designed for one attachment only, the one on your watch: a sliding connector for Apple Watch, a Garmin QuickFit 22 mm, or a 20 mm fast-release spring bar for Samsung. Follow the six steps above, with no tools, and your watch changes style in a few minutes. Here is the easiest model to fit for each of these three watches.

Motion strap, sport silicone, orange, front view - Apple Watch | Clipz-it

Motion | Sport silicone band

Apple Watch small and large sizes · depends on generation and variant

Slides into the groove of your Apple Watch until it locks. A simple change: no tools needed.

Motion strap, silicone, black, front view - Garmin QuickFit 22mm | Clipz-it

Motion | QuickFit 22 mm (silicone) - 9 colors

Garmin QuickFit 22 mm only

QuickFit 22 mm attachment: locks and releases without tools, then checks with a simple pull.

Pulse strap, silicone, orange - Samsung Galaxy Watch | Clipz-it

Pulse | Soft silicone band for Samsung Galaxy Watch

Samsung Galaxy Watch 4 to 7, FE, Watch3 41 mm and Active (20 mm)

Fast-release spring bars: it fits without tools, following the steps above exactly.

Variants by model and attachment

An Apple Watch, a Garmin and a Samsung Galaxy Watch do not necessarily share the same mechanism. Identify the actual attachment and confirm the band fits the exact model of your watch.

Steps to follow for the attachment you find
Watch or system Attachment to look for How to remove the band Key point
Apple Watch Release button on the back of the case Hold the button and slide the band out The new band is designed for the exact Apple Watch model
Garmin with QuickFit Button on the band's connector Press the button and release the connector from the spring bar The new connector matches the required system and size
Watch with lever spring bar, including some Garmin and Samsung models Small movable pin under the band Push the pin inward to release the spring bar Band width matches the lug width, in millimeters
Watch with standard spring bar or screws Spring bar with no visible lever, or screw-in attachment Use the tool that matches the attachment you find Keep the attachment parts and refit them correctly

On a Garmin Forerunner, the generation and exact model matter more than the name "Forerunner" alone. Before you buy or fit a band for a Forerunner 965, 235, 35, 30 or 10, compare your watch's attachment with the manufacturer's or the band's specifications. Likewise, for a Samsung Galaxy Watch, confirm the type of spring bar fitted rather than assuming one mechanism covers the whole range.

On a Festina, Herbelin or another watch with lugs, measure the lug width if the band attaches between two case lugs. Showroomprivé reminds you that the band must have the same width as the lug width. The material, whether silicone, leather, nylon or metal, does not replace this mechanical check.

What to do if the band resists or does not stay on?

Never force a band that resists. Check the attachment again, confirm it is aligned, and check every attachment point before you wear the watch.

If an Apple Watch band does not slide out when you press the button, keep the case flat and make sure you press the button on the side you want to remove. Release, reposition your fingers, then try again with steady pressure. If the mechanism seems stuck, do not insert an object that could damage the slot.

If a lever spring bar falls out while you change a Samsung Galaxy Watch band or another watch's band, find it before you continue. A missing, bent or misaligned spring bar cannot hold the band properly. Check both ends of the spring bar after fitting, and start again if either end is out of its seat.

Finally, a band that comes off under light pulling may be badly fitted or incompatible. Check the attachment system, then the width in millimeters when the watch uses lugs. To go deeper before you replace it, see our guide to choosing a smartwatch band.

Frequently asked questions

The questions below cover the most searched steps for the Apple Watch, Garmin Forerunner and Samsung Galaxy Watch, as well as choosing a tool-free attachment.

How do I change the band on an Apple Watch?

To change the band on an Apple Watch, place the case face down on a soft cloth. Hold the release button near the band, then slide that end out of its slot. Repeat on the other side. Then slide each end of the new, compatible band in and gently pull on it to check that it stays in place.

Can you change a watch band without tools?

Yes. A band with a release button, a Garmin QuickFit connector or a lever spring bar can usually be removed without tools. First identify the mechanism on your watch, then press only the movable part made for that purpose. A standard spring bar with no lever, or a screw attachment, needs the right tool.

How do I change the band on a Garmin Forerunner 965?

To change the band on a Garmin Forerunner 965, start by checking the attachment fitted to your watch and the compatibility details for the replacement band. If the attachment has a QuickFit button, press it to release the band from the spring bar. If it has a small lever, move the lever inward. After fitting, check that both sides hold.

Does the same method work on every Garmin Forerunner?

No. Garmin Forerunner watches should not be treated as if they all share the same attachment. For a Forerunner 235, 35, 30 or 10, check the attachment on the watch and the instructions for that exact model before you remove the band. Look for a button, a lever, a standard spring bar or screws, then use the matching method.

How do I change the band on a Samsung Galaxy Watch?

To change the band on a Samsung Galaxy Watch, first identify the attachment on your model. If the band has a lever spring bar, push its small pin inward to release one end, then remove the band. Fit the new, compatible band and check that both ends of each spring bar are seated in the case.

What if the new watch band does not stay on?

If the new band does not stay on, take it off before you wear the watch. Check that its attachment system matches the case, and that every button, spring bar or screw is properly engaged. For a band that fits between lugs, also check the lug width in millimeters. A band that still moves after refitting should be replaced with a compatible model.

Sources

The sources below explain the basics of replacing a band and checking the lug width. For steps specific to one model, also consult the manufacturer's documentation.

Browse Clipz-it bands for Apple Watch and check compatibility with your watch before you choose.

Shop bands